Close-up of natural timber grain and warm board colour

Natural Ash

Pale blond ash-look decor with a soft pink cast. From the Highland Hybrid Collection.

Natural Ash from Highland Hybrid Collection
Hybrid

Natural Ash

from the Highland Hybrid Collection

Pale blond ash-look decor with a soft pink cast.

ABOUT NATURAL ASH

Natural Ash is a pale blond decor reproducing the Victorian Ash look ? soft straw-to-blond with the faint pink undertone characteristic of that timber group, and a fine straight grain with little dramatic figure.

It is the softest-toned board in this range. Where Australian Blackbutt is golden, Natural Ash is cooler and slightly rosier, and the effect in a room is gentle rather than bright. It is a quiet floor that does not assert itself.

That makes it a good match for the era of house it evokes. Victorian Ash and Tasmanian Oak were laid extensively through mid-century Australian homes, so in a 1950s or 1960s Sutherland Shire property this decor sits naturally with the original timber windows and simple detailing. It also suits a contemporary minimal interior for the same reason ? it stays out of the way.

The fine straight grain keeps the floor visually calm across a large area, and the low contrast means it works well in smaller rooms where a busier decor would feel crowded.

As with any pale floor, dark grit shows more than it would on a mid-brown board, though the fine grain pattern helps break it up. Dust is well hidden.

At 6mm it is a practical choice where floor height against existing surfaces is a constraint.

Use this colourway as a selection reference rather than a stock or pricing claim. Samples should be checked in the actual room under daylight and artificial light before ordering.

Installation still depends on the parent range and the site. Subfloor flatness, moisture, floor height, trims, door clearances, acoustic underlay and room sequencing can all affect whether this colour is suitable for the project.

SPECIFICATION SUMMARY

ColourNatural Ash
RangeHighland Hybrid Collection
Type Hybrid
Core Rigid limestone composite
Dimensions 1520 ? 180 ? 6mm
Wear layer 0.5mm
Surface Embossed woodgrain
Finish Lacquer matte
Profile Micro-bevel edge
Install Angle-to-angle locking, floating
Water resistance 100% waterproof
Underlay 1mm IXPE
Acoustic rating 5-star
Slip rating Confirm on enquiry
Commercial rating Confirm on enquiry
Box size Confirm on enquiry
Warranty Confirm on enquiry

Fields marked confirm-on-enquiry are not guessed because the source catalogue does not provide a verified value.

INSTALLATION NOTES

Floating only, angle-to-angle click profile. No adhesive. Expansion gaps required at every perimeter and around fixed vertical elements.

Clean, dry and flat. At 6mm this is a slim board and it telegraphs subfloor imperfection more than a thicker one ? level properly before laying.

Suitable throughout, including kitchens, bathrooms and laundries. The limestone composite core is 100% waterproof.

Next steps: compare the Highland Hybrid Collection, return to Hybrid Flooring, or request a Court Flooring Sutherland measure and quote.

Warm timber-look flooring background

Natural Ash from the Highland Hybrid Collection: request a quote or ask about a sample.