Close-up of natural timber grain and warm board colour

Coastal Sand

Pale sandy oak, light with the warmth left in. From the Coastal Oak Collection.

Coastal Sand from Coastal Oak Collection
Engineered Timber

Coastal Sand

from the Coastal Oak Collection

Pale sandy oak, light with the warmth left in.

ABOUT COASTAL SAND

Coastal Sand is the pale warm board in this range ? light enough to brighten a room, warm enough that it never tips toward grey. The tone sits close to dry beach sand, and in strong light it reads almost bleached while still holding a soft golden base.

That combination is the reason it gets specified so often in bayside houses. A cool pale floor can feel clinical in a beach house; a golden floor can feel heavy in summer. Coastal Sand keeps the brightness and the relaxed warmth at the same time, which is a harder balance to strike than it appears.

The wire-brushing is subtle at this tone. With little contrast between the recessed grain and the raised surface, the texture registers more underfoot than in the eye, and the overall effect across a large area is calm and continuous rather than busy.

It pairs naturally with the full light neutral palette ? whites, soft greys, pale timbers, linen, rattan ? and holds its own against mid-blue and sage green. It also makes a modestly sized room feel appreciably larger.

The practical advantage in a coastal house is real: of every board in this collection, this is the best at hiding tracked-in sand. Dark grit shows more than it would on a mid-brown floor, but sand effectively disappears, and in a house a few streets from the beach that is the debris you are actually dealing with.

Use this colourway as a selection reference rather than a stock or pricing claim. Samples should be checked in the actual room under daylight and artificial light before ordering.

Installation still depends on the parent range and the site. Subfloor flatness, moisture, floor height, trims, door clearances, acoustic underlay and room sequencing can all affect whether this colour is suitable for the project.

SPECIFICATION SUMMARY

ColourCoastal Sand
RangeCoastal Oak Collection
Type Engineered timber
Core Multi-ply
Thickness 14.5mm
Veneer 3mm European Oak
Dimensions 1900 ? 190mm
Finish UV lacquer, 8-10 coats; matte wire-brushed
Profile Bevelled edge
Install Tongue & groove
Board format Nested ? short and full length, minimum 600mm
Box size 2.166m?
Warranty 20yr residential wear + lifetime structural
Slip rating Confirm on enquiry
Acoustic rating Confirm on enquiry
Janka Confirm on enquiry
Grade Confirm on enquiry
Planks per box Confirm on enquiry

Fields marked confirm-on-enquiry are not guessed because the source catalogue does not provide a verified value.

INSTALLATION NOTES

Tongue-and-groove profile ? direct stick or float over a high-density acoustic underlay. Boards are nested, so open several boxes and select as you lay to distribute lengths evenly.

Clean, structurally sound and dry, flat to within 3mm over a 2m straightedge. Grind high spots and fill low spots before laying.

Not suitable for bathrooms, laundries or permanently wet areas. Suitable for kitchens and entries with prompt spill management.

Next steps: compare the Coastal Oak Collection, return to Engineered Timber, or request a Court Flooring Sutherland measure and quote.

Warm timber-look flooring background

Coastal Sand from the Coastal Oak Collection: request a quote or ask about a sample.