Close-up of natural timber grain and warm board colour

Seaside Grey

Soft weathered grey with brown still showing through. From the Coastal Oak Collection.

Seaside Grey from Coastal Oak Collection
Engineered Timber

Seaside Grey

from the Coastal Oak Collection

Soft weathered grey with brown still showing through.

ABOUT SEASIDE GREY

Seaside Grey is a weathered grey oak ? the colour of timber that has spent a few seasons in salt air rather than the flat grey of a stain applied over the top. Enough brown shows through to keep the board reading as wood, and the wire-brushed grain gives the grey somewhere to sit so it never looks painted.

It is the most recognisably coastal board in the collection and the one that most directly evokes a jetty plank or a weatherboard that has silvered off. In a house with a water view it does something specific and worthwhile: it picks up the greys already in the outlook ? water, sky, the underside of tea-tree ? and brings them inside, so the floor connects to the view rather than competing with it.

It suits white and soft grey walls, pale stone, natural fibre rugs and the blues and sage greens common in owner-occupied and rental homes. It also sits well with black window frames, where the cool floor and dark joinery read as a deliberate pairing.

Practically it is one of the easier floors here. The mid-depth grey is dark enough to disguise tracked-in sand and light enough that dust does not accumulate visibly ? a genuinely sensible combination for a beach house that gets used hard over summer and sits empty through winter.

Use this colourway as a selection reference rather than a stock or pricing claim. Samples should be checked in the actual room under daylight and artificial light before ordering.

Installation still depends on the parent range and the site. Subfloor flatness, moisture, floor height, trims, door clearances, acoustic underlay and room sequencing can all affect whether this colour is suitable for the project.

SPECIFICATION SUMMARY

ColourSeaside Grey
RangeCoastal Oak Collection
Type Engineered timber
Core Multi-ply
Thickness 14.5mm
Veneer 3mm European Oak
Dimensions 1900 ? 190mm
Finish UV lacquer, 8-10 coats; matte wire-brushed
Profile Bevelled edge
Install Tongue & groove
Board format Nested ? short and full length, minimum 600mm
Box size 2.166m?
Warranty 20yr residential wear + lifetime structural
Slip rating Confirm on enquiry
Acoustic rating Confirm on enquiry
Janka Confirm on enquiry
Grade Confirm on enquiry
Planks per box Confirm on enquiry

Fields marked confirm-on-enquiry are not guessed because the source catalogue does not provide a verified value.

INSTALLATION NOTES

Tongue-and-groove profile ? direct stick or float over a high-density acoustic underlay. Boards are nested, so open several boxes and select as you lay to distribute lengths evenly.

Clean, structurally sound and dry, flat to within 3mm over a 2m straightedge. Grind high spots and fill low spots before laying.

Not suitable for bathrooms, laundries or permanently wet areas. Suitable for kitchens and entries with prompt spill management.

Next steps: compare the Coastal Oak Collection, return to Engineered Timber, or request a Court Flooring Sutherland measure and quote.

Warm timber-look flooring background

Seaside Grey from the Coastal Oak Collection: request a quote or ask about a sample.