Close-up of natural timber grain and warm board colour

Peninsula Oak

Balanced natural oak, neither warm nor cool. From the Coastal Oak Collection.

Peninsula Oak from Coastal Oak Collection
Engineered Timber

Peninsula Oak

from the Coastal Oak Collection

Balanced natural oak, neither warm nor cool.

ABOUT PENINSULA OAK

Peninsula Oak is the balance point of this collection ? an honest natural oak with neither a warm push nor a cool correction. Alongside Coastal Estate it is lighter and less golden; alongside Coastal Sand it is deeper and more substantial.

Its neutrality is the reason to choose it. With no strong bias in either direction, it will not force decisions elsewhere in the room, which makes it the easiest board to commit to early in a renovation when the wall colours, benchtops and joinery are still open. Whichever way those choices go, the floor will still work.

The wire-brushed surface gives it texture and keeps a neutral colour from reading as bland. Under changing daylight it shifts convincingly ? slightly warmer in afternoon sun, cooler under an overcast sky ? which is a quality no printed floor manages.

It suits almost any Peninsula interior: the light neutral palette it was named for, but equally a period home or a straightforward contemporary renovation with no coastal reference at all.

If you are laying a floor through a whole house rather than one room, this is the board that will look right in the most rooms. Front room with morning sun, hallway with no natural light at all, west-facing living area that gets hammered at four o'clock ? it holds up in all three.

Use this colourway as a selection reference rather than a stock or pricing claim. Samples should be checked in the actual room under daylight and artificial light before ordering.

Installation still depends on the parent range and the site. Subfloor flatness, moisture, floor height, trims, door clearances, acoustic underlay and room sequencing can all affect whether this colour is suitable for the project.

SPECIFICATION SUMMARY

ColourPeninsula Oak
RangeCoastal Oak Collection
Type Engineered timber
Core Multi-ply
Thickness 14.5mm
Veneer 3mm European Oak
Dimensions 1900 ? 190mm
Finish UV lacquer, 8-10 coats; matte wire-brushed
Profile Bevelled edge
Install Tongue & groove
Board format Nested ? short and full length, minimum 600mm
Box size 2.166m?
Warranty 20yr residential wear + lifetime structural
Slip rating Confirm on enquiry
Acoustic rating Confirm on enquiry
Janka Confirm on enquiry
Grade Confirm on enquiry
Planks per box Confirm on enquiry

Fields marked confirm-on-enquiry are not guessed because the source catalogue does not provide a verified value.

INSTALLATION NOTES

Tongue-and-groove profile ? direct stick or float over a high-density acoustic underlay. Boards are nested, so open several boxes and select as you lay to distribute lengths evenly.

Clean, structurally sound and dry, flat to within 3mm over a 2m straightedge. Grind high spots and fill low spots before laying.

Not suitable for bathrooms, laundries or permanently wet areas. Suitable for kitchens and entries with prompt spill management.

Next steps: compare the Coastal Oak Collection, return to Engineered Timber, or request a Court Flooring Sutherland measure and quote.

Warm timber-look flooring background

Peninsula Oak from the Coastal Oak Collection: request a quote or ask about a sample.